Show Summary Details

Page of

Printed from Oxford Research Encyclopedias, Environmental Science. Under the terms of the licence agreement, an individual user may print out a single article for personal use (for details see Privacy Policy and Legal Notice).

date: 22 February 2024

Causes of Soil Salinization, Sodification, and Alkalinizationfree

Causes of Soil Salinization, Sodification, and Alkalinizationfree

  • Elisabeth N. BuiElisabeth N. BuiCommonwealth Scientific and Industrial Research Organisation, Land and Water


Driving forces for natural soil salinity and alkalinity are climate, rock weathering, ion exchange, and mineral equilibria reactions that ultimately control the chemical composition of soil and water. The major weathering reactions that produce soluble ions are tabled. Where evapotranspiration is greater than precipitation, downward water movement is insufficient to leach solutes out of the soil profile and salts can precipitate. Microbes involved in organic matter mineralization and thus the carbon, nitrogen, and sulfur biogeochemical cycles are also implicated. Seasonal contrast and evaporative concentration during dry periods accelerate short-term oxidation-reduction reactions and local and regional accumulation of carbonate and sulfur minerals. The presence of salts and alkaline conditions, together with the occurrence of drought and seasonal waterlogging, creates some of the most extreme soil environments where only specially adapted organisms are able to survive. Sodic soils are alkaline, rich in sodium carbonates, with an exchange complex dominated by sodium ions. Such sodic soils, when low in other salts, exhibit dispersive behavior, and they are difficult to manage for cropping. Maintaining the productivity of sodic soils requires control of the flocculation-dispersion behavior of the soil. Poor land management can also lead to anthropogenically induced secondary salinity. New developments in physical chemistry are providing insights into ion exchange and how it controls flocculation-dispersion in soil. New water and solute transport models are enabling better options of remediation of saline and/or sodic soils.


  • Environmental Issues and Problems
  • Environmental Processes and Systems
  • Agriculture and the Environment


Soil salinization refers to the process of salt accumulation in terrestrial landscapes. It occurs naturally where evaporation is high relative to precipitation (there is a seasonal water deficit) and leaching is insufficient to move salts out of the soil profile (Duchaufour, 1982; Schofield & Kirkby, 2003), often in landscapes that do not drain into the ocean, called “endorheic” drainage basins. Soils with accumulations of gypsum (CaSO42H2O) are Gypsisols; those with accumulations of calcium carbonates are Calcisols or sometimes Chernozems and Kastanozems in the World Reference Base (IUSS, 2015). Salinity in the form of sodium (Na) salts is associated with “[s]oils with limitations to root growth,” especially Solonetz (with a high content of exchangeable Na) and Solonchak (with high concentration of soluble salts) Reference Soil Groups (IUSS, 2015; see the article “Classification and Mitigation of Soil Salinization”); these are the saline soils that have received the most attention from an agricultural perspective because of their extensive area in Europe (e.g., Szabolcs, 1974) and in Australia (e.g., Rengasamy, Chittleborough, & Helyar, 2003; see the article “Soil Salinization”). However, extensive areas of saline soils occur elsewhere in the world (Ghassemi, Jakeman, & Nix, 1995; Schofield & Kirkby, 2003). Soils with a “natric” (from Arabic natroon, salt) diagnostic horizon have a dense subsurface horizon with a distinctly higher clay content than in the overlying horizon(s). A natric horizon has a high content of exchangeable Na and, in some cases, a relatively high content of exchangeable Mg. Diagnostic soil characteristics reflect soil-forming processes, thus the presence of a natric horizon reflects “sodification,” the process of sodium accumulation.

Soluble salts dissolve in water into charged ionic species (electrolytes), and thus saline soil solutions can conduct electricity. Saline soils are defined those with an electrical conductivity (EC)>4dSm1 in a saturated paste extract at 25°C, a pH<8.5, and exchangeable Na<15% of total exchangeable cations (Richards, 1954; see the article “Soil Salinization”). They are distinct from sodic soils with exchangeable Na>15% and, in older literature, alkali soils with a pH>8.5. Salt-affected soils can be saline-sodic, with a saturated paste extract EC>4dSm1, a pH<8.5, and an exchangeable Na>15% of total exchangeable cations. Soil salinity implies the presence of any salt, including chlorides (Cl), sulfates (SO42), nitrates (NO3), borates (BO33), carbonates (CO32), and bicarbonates (HCO3) of Na, calcium (Ca), magnesium (Mg), potassium (K), and iron (Fe) (Rengasamy, 2006). Alkali soil implies the presence of NaHCO3 and Na2CO3, therefore these are also sodic soils. Sodicity refers to the amount of sodium present in a soil. Alkalinization is the process of rise in pH during the accumulation of sodium carbonates (this process is explained in more detail in the section “Formation of Soil Carbonates and Alkalinity”).

This article summarizes the causes and processes that give rise to soil salinity and alkalinity in the environment more generally. It outlines the role of rock weathering, release of Na ions, and soil solution chemistry in the formation of sodic soils. It summarizes the role of arid and semi-arid climate and water movement through landscapes in regulating soil chemical equilibria and mineral precipitates. It briefly illustrates how understanding of ion exchange and mineral equilibria can help in land management. Finally, it includes a case study from an area in South Australia where salinity problems in a dynamic geochemical setting are linked with the formation of potentially acid sulfate soils inland (Fitzpatrick, Fritsch, & Self, 1996; Fitzpatrick et al., 1999).

Sodium and Its Role in Sodification

Sodic soils and the natric diagnostic criteria in the World Reference Base for soil resources (IUSS, 2015) are defined on the basis of (1) their exchangeable sodium percentage (ESP), the proportion of Na+ on the cation exchange complex measured in similar units and expressed as a percentage; (2) their exchangeable sodium ratio (ESR), where ESR=[Na+]/(CEC[Na+]); or (3) their sodium adsorption ration (SAR), the ratio of the concentration of Na+ to Ca2+ and Mg2+ ions, where SAR=[Na+]/(([Ca2+]+[Mg2+])/2) (Richards, 1954). In Australia an ESP>6 is used to indicate sodicity because at this ESP soils start to exhibit dispersion (Isbell, 1996), but traditionally, an ESP>15 is the threshold that defines sodic soil (Rengasamy, 2006). An ESP of 15 generally corresponds with an SAR of 13 (Richards, 1954).

The chemical composition of a soil solution is the result of acid-base reactions, precipitation and dissolution of solid phases, coordination reactions of metal ions and ligands, oxidation-reduction reactions, and adsorption-desorption process at soil–solution interfaces. The partial pressure of CO2 controls the dissolution and precipitation of soil carbonates and bicarbonates and the activities of ions, including H+, which control soil pH. These chemical processes are studied using principles of physical chemistry including chemical thermodynamics (Stumm & Morgan, 1970) and proper management of saline, sodic, and/or alkaline soils requires a good understanding of thermodynamics (e.g., Mau & Porporato, 2016; Šimůnek & Suarez, 1994).

Cation sorption and exchange reactions between ions in solution and clay mineral surfaces are responsible for the unique physicochemical properties and behavior of sodic soils. If cation exchange is represented by an equation similar to one used for chemical reactions in solutions, the reaction between a calcium-saturated soil exchange complex and a sodium chloride solution can be expressed as CaX2+2NaCl2NaX+CaCl2, where X designates the soil exchange complex (Richards, 1954). But generally the reaction does not go to completion as shown in the equation, because the soil solution contains a mixture of ions (i.e., it is not a pure sodium chloride solution), and as long as soluble calcium exists in the solution phase, there will be adsorbed calcium ions on the exchange complex. Near neutral pH, most soils have an exchange complex dominated by Ca2+ and Mg2+. As the soil solution becomes concentrated through evaporation or transpiration by plants, the solubility limits of calcium sulfate, calcium carbonate, and magnesium carbonate are exceeded and these minerals precipitate. The result is an increase in the relative proportion of sodium ions in solution and consequently a replacement of the some exchangeable Ca2+ and Mg2+ by Na+ on the exchange complex.

Sodic soils with low EC can experience severe structural degradation and exhibit poor soil–water and soil–air relations (Rengasamy et al., 2003): Swelling and dispersion of soil aggregates dominated by Na+ on the exchange complex reduce the porosity and permeability of soils and increase the soil strength even at low suction (high water content). Soil strength is a measure of the capacity of soil to resist deformation and refers to the amount of energy (measured in megapascals, MPa) required to break apart aggregates or move implements through the soil; it affects the ability of plant roots to penetrate the soil. These adverse physicochemical conditions restrict water storage and movement, aeration, and nutrient uptake. The range of soil water content that does not limit plant growth and function (non-limiting water range) becomes narrow, and soils are either too wet immediately after rain or too dry within a few days for optimal plant growth (Rengasamy et al., 2003).

Mg2+ also has deleterious effects on soil structure under certain circumstances (Zhang & Norton, 2002). The saturated hydraulic conductivity (Ks) of an illitic soil column leached with a MgCl2 solution is much lower than if a CaCl2 solution is used (Quirk & Schofield, 1955), and Ks is consistently lower in Na–Mg systems than in Na–Ca ones (McNeal et al., 1968). Swelling and disaggregation, which reduces large pores, appear to be the dominant process causing the rapid initial decline of Ks, with clay dispersion and subsequent pore plugging becoming progressively important when electrolyte concentration is reduced to below the critical flocculation concentration (Zhang & Norton, 2002); the effects are observed for soils containing variable amounts of smectite, kaolinite, illite, and vermiculite, regardless of CaCO3 content (Keren, 1991). The general explanation given is that Mg2+, compared with Ca2+, has greater hydration energy and a larger hydration shell, which results in greater clay swelling; the greater swelling leads to weaker aggregate bonds and hence lower aggregate stability (Keren, 1991; Zhang & Norton, 2002).

Experiments show that, when soils are leached with salt solutions containing a mixture of a monovalent cation and a divalent cation until equilibrium between the soil and solution is established, the proportions of exchangeable monovalent and divalent cations present on the soil-exchange complex vary with the total cation concentration as well as with the monovalent:divalent cation ratio of the salt solutions. In the 1930s, Gapon found empirically that the influence of total cation concentration is taken into account and a linear relation with the exchangeable monovalent:divalent cation ratio is obtained when the molar concentration of the soluble monovalent cation is divided by the square root of the molar concentration of the soluble divalent cation (Richards, 1954). Thus for the reaction, NaX+1/2Ca2+=Ca1/2X+Na+


where KG is the Gapon coefficient.

The Gapon equation works well for describing Na+-Ca2+ exchange on smectite- and vermiculite-rich soils. It is still used extensively to predict Na+-Ca2+ exchange in arid environments (e.g., Mau & Porporato, 2016).

Cation Exchange and Solution Interface Chemistry

Understanding saline or sodic soil behavior requires an understanding of physicochemical phenomena of aqueous solutions of electrolytes at colloidal interfaces. Soil aggregrates are complex flocculated materials composed of small mineral particles and organic molecules, generally assumed to have a negatively charged surface, although this depends on the soil pH and point of zero charge (Frenkel, Levy, & Fey, 1992; Sparks, 1995). The electric field originating from the surface charge determines the force of adsorption of ions. Traditionally diffuse double layer theory or triple layer theory is invoked to explain the behavior of cations in solution on the negatively charged clay mineral-organic soil colloidal exchange complex (Sparks, 1995). In the first layer, the negative surface charge of the colloid is compensated by positively charged counterions tightly held due to electrostatic chemical interactions. The second layer is loosely associated with the colloidal interface and is thus called the “diffuse layer.” It consists of free ions that move in the fluid under the influence of weaker chemical attraction forces rather than being tightly held. The characteristic thickness of the double layer is the Debye length. In aqueous solutions it is typically on the scale of a few nanometers, and its thickness decreases with increasing concentration of the electrolyte.

If the electrolyte concentration is below the critical flocculation concentration, the Debye length increases and dispersion of the colloids occurs. The critical flocculation concentration for soil systems depends not only on the electrolyte concentration but also on the solution pH and point of zero charge (pzc) of soil colloids. If the pH<pzc, the colloid surface has a net positive charge, conversely, if the pH>pzc, the surface has a net negative charge. Flocculation is greatest at pH=pzc, and soils tend to weather toward a pH=pzc at which mineral dissolution is at a minimum.

The Debye-Hückel equation has been used to predict mean activity coefficients for ions in solutions that deviate from ideal behavior, when their thermodynamic properties would be analogous to those of a mixture of ideal gases; it works best for dilute solutions. The Debye-Hückel law predicts that the mean activity coefficient of an ion in an electrolyte solution is proportional to the square root of the solution’s ionic strength. Pitzer equations have been introduced to model ion interactions that cannot be neglected in concentrated solutions (Šimůnek & Suarez, 1994).

Some ions are held more tightly than others. Hydration shell and effective ionic radius are parameters introduced to fit experimental data for observed specific ion effects in soil chemistry and physics of water at interfaces, some of the Hofmeister effects (Lo Nostro & Ninham, 2012). With only monovalent alkali metal cations in solution, the general order of selectivity is Li+<Na+<K+<Rb+<Cs+ and is related to the size of the hydrated ionic radius; Cs+, the ion with the smallest hydrated radius, can approach the negatively charged interface the closest and is held the most tightly. However, with divalent ions there is little consistency in the selectivity (Sparks, 1995). In soil solutions with ions of different valence, generally the higher charged ion will be preferred, for example, Al3+>Ca2+>Mg2+>K+=NH4+>Na+. Thus, when both Na+ and Ca2+ are present in a soil solution, the Ca2+ is held in the first layer and Na+ in the diffuse layer. Anions such as phosphate (PO43) and SO42 can be held tightly on the surface of positively charged oxide particles (Sparks, 1995), but Cl and NO3 are in the diffuse layer.

Furthermore, polarization must be considered. Polarization is the distortion of the electron cloud about an anion by a cation. The smaller the hydrated radius of the cation, the greater the polarization, and the greater its valence, the greater its polarizing power. With anions, the larger they are, the more easily they can be polarized (Sparks, 1995). Organic and inorganic anions in electrolyte solutions have been observed to increase the critical flocculation concentration of clay mineral suspensions by an order of magnitude (Frenkel et al., 1992). This means that the overall composition of the soil, its solid and solution components, needs to be considered to understand sodic soil behavior. Yet the role of organic matter (the composition of organics) in explaining sodic soil behavior has not been studied.

Recently quantum mechanical forces have been introduced to classical double layer theory (Lo Nostro & Ninham, 2012). Lo Nostro and Ninham (2012) have extended the Debye-Hückel theory and shown how Hofmeister effects (as ion-specific quantum forces) depend on an interplay between specific surface chemistry, surface charge density, pH, buffer, and counterion with polarizabilities and ion size. These new developments in physical chemistry have prompted Liu et al. (2013) to derive new selectivity coefficients for different ion exchange pairs as a function of surface potential in different soils. These developments herald a new era in soil chemistry that should help in better understanding the behavior of saline and sodic soils, where concentrated electrolyte solutions occur seasonally and structural stability changes as a result of leaching with more dilute rain or irrigation water.

Climate and the Role of Water Movement

Salt content changes down a soil profile with seasonal moisture fluctuations, evapotranspiration, and infiltration rate, and sometimes soils only experience transient salinization in the subsoil (Rengasamy et al., 2003). Secondary salinization can arise when salts accumulate near the soil surface as a result of rising water tables due to land management practices that change the soil hydrology, such as irrigation or tree clearing (Cisneros, Cantero, & Cantero, 1999; Rengasamy, 2006; Schofield, Thomas, & Kirkby, 2001; Williamson, 1986). The chemical composition of the irrigation water and underlying water table is critically important in determining the salts that precipitate.

A large fraction of natural and anthropogenically induced secondary salinity occurs in desert and grassland biomes, in savanna ecosystems and rangelands which are closely associated with semi-arid, seasonally contrasted climates in the tropics and subtropics. Carbonate precipitation also occurs in such climatic conditions. In Australia, soil carbonate is generally rare to absent in high-rainfall regions, including the Wet Tropics and much of the east coast of the continent, coastal southwest Western Australia, and Tasmania (Wilford, de Caritat, & Bui, 2015). Nevertheless, the occurrence of salt-affected soils is not a perfect match with climate, even when also taking lithology (a potential source of solutes released by weathering) into account (Schofield & Kirkby, 2003). Global patterns of salinization have changed with climate over geologic time and because climatic change will alter patterns of precipitation and evapotranspiration and landscape hydrology, spatial patterns of soil salinity and alkalinity will shift (Schofield & Kirkby, 2003). In fact, patterns of salinity respond to changes in rainfall in a matter of years (Schagerl, 2016).

Local-scale controls are associated with topography, parent material, and groundwater recharge and discharge areas (Gile et al., 2007). Salt lakes and/or deposits can form in endorheic topographic positions under semi-arid and arid climates (e.g., Nasri, Bouhlila, Saaltink, & Gamazo, 2015; Schagerl, 2016; Schofield et al., 2001). Hydrogeological connectivity between leachable source rocks and saline lakes controls the potential of salt lake systems to form economically viable mineral deposits (Mernagh et al., 2016). Groundwater recharge areas, generally in highlands, are well drained and do not accumulate salts.

Transient salinization, sodification, and alkalinization are seasonally dependent and fluctuate with depth (Figure 1) as a function of the penetration of the wetting front associated with precipitation, evapotranspiration, and the time interval between rainfall events.

Figure 1. Water movement through the root zone and surface soil horizons of a hillslope, temporary ponding of water at the top of a slowly permeable, saline and/or sodic subsoil horizon, evaporation, and accumulation of salts in scalded patches at the soil surface (transient salinity) without the influence of groundwater on the left side of the vertical dotted line.

Source: From Rengasamy et al., 2003, with permission.

Tree clearing disrupts the hydrological balance of landscapes (George, Nulsen, Ferdowsian, & Raper, 1999; Runyan & D’Odorico, 2010; Williamson, 1986); it not only reduces the amount of evapotranspiration but also increases the amount of water that drains through soil and recharges groundwater systems (Figure 2).

Figure 2. In this conceptual diagram, drainage is represented by downward pointing arrows from the rooting zone to the groundwater table. Similarly, evapotranspiration (ET) is represented by arrows pointing from the vegetation (in panels A and B) or the ground (panel C) to the atmosphere. In panel C, exfiltration (i.e., the capillarity driven upward flow of water from the water table to the surface, where it evaporates) is represented by arrows that point from the groundwater table to the shallow rooting zone. The size of arrows is proportional to the contribution of the process they represent to the total water budget. Depth to water table (DTW) and rooting zone (Zr) illustrate the case for the Murray-Darling Basin in Victoria. (a) Natural vegetation cover with a dimorphic rooting system characterized by an extended tap root that reaches the saturated zone and a dense network of shallow roots within the shallow rooting zone. (b) Following land use change, salts concentrated within the salt bulge are mobilized by the rising water table. The change in land use also decreases ET and increases drainage beneath the rooting zone because of the lower rates of root water uptake. (c) Continued drainage and a rise in the water table without alternative measures being implemented (e.g., groundwater pumping) lead to a stratified soil column such that the highest-salinity water is at the surface where exfiltration continues to bring high-salinity water from the groundwater to the surface.

Rising groundwater tables due to increased drainage past the root zone after tree clearing can bring salts within < 2 m of the soil surface where evaporative pumping can then lead to the accumulation of salts at the soil surface. The salt can be remobilized from the subsoil where salt bulges form below the tree rooting zone or come from deeper confined saline aquifers that are leaking upward due to the increased pressure from the increased recharge—in this case the recharge area can be very distant from the saline discharge area. These hydrological processes lead not only to soil salinization but also to salinization of streams, rivers, and reservoirs (Ghassemi et al., 1995).

Formation of Soil Carbonates and Alkalinity

A soil pH>8.3 indicates the presence of large amounts of carbonates. The carbonates can be precipitated from soil solution (Table 1, equation 1 in reverse) associated with alteration haloes or weathering zones around ultramafic rocks (e.g., Anand & Paine, 2002), be present in groundwater, be formed from biological processes, respiration and decay of organic matter (Quade, Chivas, & McCulloch, 1995; Table 1, equations 6, 7, and 9), or be inherited directly from calcareous parent material (Gile et al., 2007; Wilford et al., 2015).

Erosional and depositional processes along soil catenary sequences in South Australia control the lateral distribution and morphology of regolith carbonate (e.g., Hill, McQueen, & Foster, 1999). Topographic position influences the local soil microclimate, the moisture regime, and biological activity, which in turn can control salt and regolith carbonate distribution (e.g., Gile et al., 2007; Harrison, Hendrickx, Muldavin, McMahon, & Wardell, 2003). Valley calcretes are common where the axis of stream or paleochannel systems and groundwater discharge zones become saturated with respect to carbonate minerals (Anand & Paine, 2002; Gile et al., 2007) in the seepage zone in Figure 1.

Carbonate minerals are generally calcite (CaCO3), dolomite (Ca0.5Mg0.5CO3), and magnesite (MgCO3) in calcareous soils, and NaHCO3 and/or Na2CO3 in alkali or sodic soils. Soil alkalinity develops because some Na2CO3, when in soil solution, dissociates into 2Na+ and CO32 and reacts with water:


Carbonic acid, H2CO3, is poorly soluble, and the equilibrium reaction favors water, H2O, and CO2 (carbon dioxide gas that escapes into the atmosphere). The remaining dissociated sodium hydroxide produces high pH values.

In layers where calcium carbonate has accumulated during pedogenesis, replacement of Ca2+ by Na+ on the exchange complex—for example, if a Na+-rich irrigation water is applied—generates sodium bicarbonate and/or carbonate (NaHCO3 and/or Na2CO3), increasing the soil pH above 9.

In addition to the toxicity of carbonate and bicarbonate species for plants (e.g., Yang, Guo, & Shi, 2010), high pH also leads to Fe, manganese (Mn), copper (Cu), zinc (Zn), and phosphorus (P) deficiency (Naidu & Rengasamy, 1993). Phytotoxicity of aluminum, present as Al(OH)4 in soils with pH>9, has also been shown (Brautigan, Rengasamy, & Chittleborough, 2012).

Sulfur Cycling

Sulfur cycling at the land–water–atmosphere interface is dynamic, especially in acid saline environments. Sulfides, such as pyrite, are present in igneous and metamorphic rocks, sediments, and peat deposits. Sulfate minerals include gypsum, anhydrite, jarosite, natrojarosite, alunite, and several other minerals that form in soils, grow diagenetically from shallow groundwaters, or precipitate directly from lake waters (Benison & Bowen, 2013; Long, Lyons, & Hines, 2009). In semi-arid environments, these sedimentary S-minerals are subjected to physical reworking by wind erosion during the dry season and chemical dissolution and reprecipitation in the wet season.

Microbial activity can influence saline soil chemistry and vice versa, particularly via the sulfur cycle (Benison & Bowen, 2013; Miletto et al., 2008; Mormile, Hong, & Benison, 2009; Whittig & Janitsky, 1963; Wolicka & Jarzynowska, 2012). Both S-oxidizing and S-reducing bacteria are involved, and therefore S-bearing minerals include both sulfides and sulfates. Unique microbial populations exist in hypersaline environments (Friedrich, Rother, Bardischewsky, Quentmeier, & Fischer, 2001; Oren, 2002), especially the acidic lakes in Australia (Mormile et al., 2009). Microbial oxidation of sulfide-bearing rocks and sediments is responsible for the occurrence of sulfuric acid in groundwater and the occurrence of inland acid sulfate soils (e.g., Appleyard, Wong, Willis-Jones, Angeloni, & Watkins, 2004; Fitzpatrick et al., 1996, 1999; Hall, Baldwin, Rees, & Richardson, 2006). Sulfate-reducing bacteria are a group of anaerobic heterotrophic microorganisms that mineralize organic matter in extreme environmental conditions, including high salinity and acidity, and participate in geological processes such as mineral precipitation and ore formation (Table 1, equations 9 and 10). Active S-reducing bacterial communities decreased the salinity of their environment by as much as 50% (Wolicka & Jarzynowska, 2012).

Weathering and Marine Influence

The sources of ions including carbonate and sulfate are weathering of rock and soil parent material, atmospheric deposition, and groundwater. Weathering occurs through the action of water and dissolved CO2 on minerals. Rain in equilibrium with the atmospheric CO2 contains a small amount of carbonic acid (H2CO3) and has a pH value of about 5.7 (Bricker et al., 1994). Soil solutions commonly have higher concentrations of H2CO3 than rainwater as a consequence of CO2 production by respiration and microbial decomposition of organic material (Table 1, equation 7). The major anion produced by carbonic acid weathering is HCO3 (Table 1, equations 1, 3, and 5). The rate of weathering is enhanced if the water contains organic acids (e.g., carboxylic acids; Table 1, equations 6 and 7) or mineral acids (e.g., H2SO4, HNO3, HCI; Table 1, equation 8). Congruent weathering reactions, such as the dissolution of limestone or quartz arenite, dissolve the rock mineral completely, leaving no solid residual (Table 1, equations 1 and 2), whereas incongruent dissolution produces clay minerals such as kaolinite as a residual byproduct (Table 1, equations 3–5).

Strontium isotope (87Sr/86Sr) studies in regolith carbonates throughout the world indicate a predominantly marine source for strontium and, by inference, Ca (Capo & Chadwick, 1999; Chiquet, Michard, Nahon, & Hamelin, 1999; Dart, Barovich, Chittleborough, & Hill, 2007; Naiman, Quade, & Patchett, 2000; Quade, Chivas, & McCulloch, 1995). Mg and Cl can also be of marine origin (Keywood et al., 1997). Playas and salt lakes can be inland dust sources of salts (Aryal, Kandel, Acharya, Chong, & Beecham, 2012; Naiman et al., 2000; Schofield, Thomas, & Kirkby, 2001). In Australia and other dry regions, eolian deposition is an important soil-forming process. Prevailing wind patterns and distance from the coast are thus important factors that influence soil salt chemistry.

Evaporative concentration processes eventually cause the precipitation of very soluble minerals. The mineral equilibria models that prevail in neutral to alkaline brine environments have been developed by Hardie and Eugster (1970) and Eugster and Hardie (1978), building on earlier work by Garrels and Mackenzie. These were applied to soils by van Beek and van Breemen (1973) and Al-Droubi, Fritz, Gac, and Tardy (1980). The Long-Lyons-Hines (2009) model (Figure 3) introduced a low-pH pathway for moderately acid brines and their minerals using data from Lake Tyrrell in Victoria, Australia, and may need to be revised in light of data for even more acid saline lakes in Western Australia (Benison & Lowenstein, 2015).

Figure 3. The compositional pathway taken by water during evaporation is a function of both the relative concentrations of components and mineral precipitation, in turn controlled by rock type (source of solutes), climate, and degree of evaporation.

Source: From Long et al., 2009.

Lake Tyrrell is a terminal lake in a closed surficial drainage (endorheic) basin, but it is connected to underlying groundwater systems (Long, Lyons, & Hines, 2009; Mernagh et al., 2016). It sits in a calcareous soil landscape where the high NaCl initial composition of water reflects a marine influence and Mg>Ca concentration (Figure 3, far left). Soil calcrete formation in recharge areas removes Ca as well as HCO3. Ferrolysis, a repeated process of alternating oxidation-reduction of dissolved Fe in wet-dry conditions that destroys clay minerals (Brinkman, 1970):


generates acidity along flow path until the spring zone area. Microbial oxidation of pyrite present in underlying sediments:


produces more acidity. During acidification, any remaining HCO3 is removed. Gypsum precipitation removes more Ca, and the saline water becomes relatively enriched in Mg as well as in Al and Fe. Evaporation of the FeAlSO4K water results in precipitation of Fe-oxides, alunite:


and jarosite:


and further enhances acidity. The resulting composition of the brine in the spring zone is a Na(Mg)Cl(SO4) solution with low pH and high amounts of Al and Fe (Long et al., 2009).

In contrast to Western Australian saline lakes, Lake Magadi in southern Kenya (Figure 3, right) and other East African soda lakes are young systems. Their genesis and chemistry are highly linked to active tectonic forces and volcanic bedrocks (Schagerl, 2016). The basaltic rocks are relatively rich in calcium, whereas the more felsic rocks are dominated by sodium-rich silicate minerals and abundant K-feldspar. Quartz is absent in many of the volcanic rocks. Carbonatite ashes composed of nahcolite (NaHCO3), trona (Na3H(CO3)22H2O), sylvite (KCl), halite, kalicinite (KHCO3), and villiaumite (NaF) are released during volcanic eruptions (Deocampo & Renaut, 2016). These deposits weather rapidly to produce secondary nahcolite, trona, thermonatrite (Na2CO3H2O), pirssonite (CaCO3Na2CO32H2O), gaylussite (CaCO3Na2CO35H2O), and calcite; much of this material is completely soluble, thus releasing alkali elements and carbonate rapidly into surface water and soils. The impact on the alkalinity and pH of these landscapes is so rapid and strong that it mimics the effect of arid evaporative processes (Deocampo & Renaut, 2016). Weathering reactions in upslope soils and groundwater environments (and atmospheric input) dominate the geochemistry of dilute inflow to the soda lakes. These reactions produce initial solute ratios that determine the subsequent geochemistry of evolved brines; for example, soda lakes may develop only in basins where the dilute inflow has Ca2+<HCO3 (Figure 3, right). This condition is favored by silicate weathering, such as the idealized hydrolysis reaction describing the weathering of sodium-rich plagioclase feldspar (Table 1, equation 4), or reactions with water and CO2 as carbonic acid (Table 1, equations 3 and 5). The weathering of these feldspars releases hydroxyl (OH) or HCO3 ions, thus raising the pH and increasing the alkalinity of soil solutions.

Coastal Soil Salinity

Salt marshes are coastal ecosystems affected by salinity. Tidal salt marshes typically consist of high, middle, and low marsh zones (Adam, 1990). There is a soil salinity maximum near the high marsh zone. One of the main reasons for this salinity increase is the decreased duration of the tidal inundation, which allows evapotranspiration to concentrate pore water salinity and salt to accumulate. Thus, elevation plays an important role in the structure and function of salt marsh ecosystems because it determines inundation frequency and duration of tides. Soil hydraulic conductivity is as important a factor as ET and temperature in determining soil salinity accumulation in a marsh (Wang, Hsieh, Harwell, & Huang, 2007). Higher hydraulic conductivity results in lower soil salinity because water rapidly moves out of the soil, flushing the soil and minimizing salt buildup.

Widespread coastal salinization can be anticipated as a result of sea level rise under global warming. For example, in the Northern Territory of Australia, changes in the form and position of the coastline over the past 50 years have been paralleled by an extension of tidal creeks and the intrusion of salt water, resulting in the loss of 17,000 ha of freshwater wetlands in the Lower Mary River plains (Mulrennan & Woodroffe, 1998). Saline sulfidic soils are usually associated with tidal salt marshes and mangroves, and complex soil chemical changes are expected to result from salinization due to sea level rise.

Table 1. Weathering Reactions That Can Lead to Accumulation of Salts Under Arid Climatic Conditions

Congruent reactions



Ebelmen-Urey reaction





Incongruent reactions that produce kaolinite



Albite weathering by hydrolysis



Albite weathering by carbonic acid



Albite weathering by oxalic (dicarboxylic) acid



Oxalate converted to CO2 by microbial action



Albite weathering by sulfuric acid



Sulfate reduction by bacteria



Precipitation of metal sulfide ore mineral



Notes: Ebelmen-Urey reaction is from Berner (2012), equations 1–8 from Bricker et al. (1994), equations 9 and 10 from Webb et al. (1998). Chemical equilibrium reactions are those with =; theoretically they are reversible. The Ebelmen-Urey reaction is unidirectional and represents the long-term continental weathering of silicates and formation of marine carbonates and the short-term soil weathering and precipitation of pedogenic carbonates in arid and semi-arid conditions.

Land Management

Land management can be a cause of soil salinization and/or of alkalinization. Tree clearing, whose consequent role in salinization was discussed above in the section “Climate and the Role of Water Movement,” is a prerequisite for agriculture and is recommended to stimulate pasture growth in Australian rangelands (McIvor & Monypenny, 1995). Irrigation is another land management practice that can result in soil salinization. The SAR and EC are also used to classify the quality of water for irrigation (Richards, 1954; see the article “Classification and Mitigation of Soil Salinization”).

Maintaining a desirable stable soil structure with good permeability depends on controlling the flocculation-dispersion behavior of the soil clay fraction. To use saline-sodic soils for cropping, irrigation water with a high electrolyte concentration and large amounts of Ca2+ and Mg2+ is applied to remove Na+ from the exchange complex without initially changing the electrolyte concentration of the soil solution; then, once the divalent cations are the dominant ones on the exchange complex, the soil can be leached with water of lower electrolyte concentration to remove the excess salts (Richards, 1954). Gypsum (CaSO42H2O) or CaCl2 can be applied to remediate sodic soils with low EC by replacing the Na+ on the exchange complex with Ca2+. Na+ is then leached out as a soluble salt, Na2SO4 or NaCl. The addition of gypsum or CaCl2 also increases permeability by increasing the electrolyte concentration.

A plant-based solution for remediating calcareous saline-sodic soils has been proposed by Qadir, Steffens, Yan, and Schubert (2003) that is reportedly as successful in reducing Na+ levels as amendment with gypsum but cheaper. It relies on planting an alkaline/Na+ tolerant crop, alfalfa (Medicago sativa L.), to enhance dissolution of calcite in the root zone and release Ca2+ to exchange with Na+. In the phytoremediation treatment, the Na+ removed from soil through leaching, rather than taken up by plants, was the principal cause of reduction in salinity and sodicity (Qadir et al., 2003). Similar results have been reported using honeysuckle (Lonicera japonica Thunb.) in China (Yan, Xu, Zhao, Shan, & Chen, 2016).

Sulfuric acid (H2SO4) can also be used for treating alkaline irrigation water and calcareous sodic soils (Miyamoto & Stroehlein, 1986): Applied directly to calcareous sodic soils, sulfuric acid dissolves CaCO3 and at pH<7 solubilizes P, Fe, and Al, all of which help increase water infiltration. The amount of exchangeable Na removed by the sulfuric acid is approximately equal to that removed by the chemically equivalent rates of gypsum in moderately Na-affected soils. Sulfuric acid provides faster movement of leaching water than does the chemically equivalent rate of gypsum in severely Na-affected calcareous soils. When applied to moderately Na-affected soils, H2SO4 can provide faster leaching than CaCl2 applied at chemically equivalent rates.

The effectiveness of sulfuric acid as an amendment to improve water infiltration depends upon the actual chemical properties of the soils and water and the application methods (Miyamoto & Stroehlein, 1986): when injected into sprinkler lines (a closed water system), the sulfuric acid reacts with HCO3 and CO3= to form carbonic acid and reduces the pH of the water below 7, as long as H2SO4 application rates are less than equivalent concentrations of HCO3. Upon sprinkling, the carbonic acid decomposes to CO2, thus leading to Ca precipitation and limited effects on sodicity and water infiltration. When applied to open-ditch flow, sulfuric acid removes HCO3 and CO3=, prevents Ca precipitation at pH>7, and may solubilize Ca from soil carbonates. Resulting effects are to maintain or reduce sodicity and to increase electrolyte concentrations, all of which contribute to increasing infiltration of sodic irrigation waters. Water-run application of NH3, a common post-planting fertilization method in row crops, causes precipitation of Ca and induces sodium hazards. Sulfuric acid applied to such water neutralizes alkalinity and minimizes or prevents Ca precipitation and associated infiltration reduction.

Numerical models that account for variations in water content, chemical composition of soil and irrigation water, temperature, and CO2 concentrations in the soil are now used for irrigation scheduling in arid and semi-arid areas. The major chemical variables that are considered are Ca, Mg, Na, K, SO4, Cl, NO3, alkalinity, and CO2. For example, the UNSATCHEM-2d model accounts for equilibrium chemical reactions between these components, such as complexation, cation exchange, and precipitation-dissolution of calcite, dolomite, gypsum, hydromagnesite, and nesquehonite (Šimůnek & Suarez, 1994). Because the ionic strength of soil solutions can reach high values, both modified Debye-Hückel and Pitzer expressions have been incorporated into the UNSATCHEM-2d model to calculate single ion activities (Šimůnek & Suarez, 1994). Most recently, Mau and Porporato (2016) have developed a control theory approach to reclaim sodic and saline-sodic soils by irrigation more rapidly.

The fate of the sulfate applied to remediate sodic soils has not been examined much beyond the point of application, but the S cycle is potentially impacted by the introduction of large quantities of gypsum or sulfuric acid into agricultural landscapes. If this sulfate eventually accumulates in wetlands and is reduced to sulfide, it may increase the area of inland potential acid-sulfate soils (Hall et al., 2006).

Case Study: Mt. Lofty Ranges, South Australia—A Mediterranean Climatic Region (>600 mm Rain per Annum, Winter Rainfall Maximum)/Koppen Climate Class: Grassland, Warm, Summer Drought

Fitzpatrick et al. (1996, 1999) used soil-landscape process understanding with remotely sensed and point data, within a GIS framework, to produce a regional scale assessment of drainage conditions, salinity, and soil acidity/alkalinity for ~80 km2 in the Mt. Lofty Ranges near the city of Adelaide in South Australia. They found saline sulfidic soils forming in waterlogged low-lying areas as a consequence of dryland salinity (Figures. 46). These unusual soils are due to contemporary weathering of pyrite (FeS2) lenses in the underlying rock, intercepted by two water-flow systems: a rising saline, sulfate-rich groundwater table responding to land clearing since European settlement, and the seasonal discharge of fresh water via a perched water table (Figure 4). Three main processes control the formation of these saline sulfidic soils: (1) poor drainage, waterlogging, and the development of saline conditions throughout the solum, (2) the accumulation of organic matter from which Fe- and S-reducing/oxidizing bacteria derive their energy, and (3) a continuous supply of Fe and S in groundwater aquifers. A decade of detailed pedological, mineralogical, hydrological, and physicochemical investigations culminated in a conceptual framework to explain the formation of these saline sulfidic soils in the context of the overall processes shaping pedogenesis in the region (Fritsch & Fitzpatrick, 1994). Similar processes may be prevalent in wetlands throughout the Murray basin in Australia (Hall et al., 2006). Currently these soils have an alkaline pH, typical of anoxic conditions when sulfate-reducing bacteria thrive (Table 1, equation 9), but if they were drained, the sulfide would oxidize upon exposure to air and these soils would become acidic (inland potential acid sulfate soils).

Figure 4. Soil drainage patterns in Hermann’s catchment, Mt. Lofty Ranges, and an idealized toposequence. Soil colors mirror drainage conditions. Note also the presence of a seasonal perched table along the toposequence.

Figure 5. Soil profile pH trend maps for Hermann’s catchment, Mt. Lofty Ranges, with an idealized toposequence. pH is very acid in the uplands and alkaline in low-lying, waterlogged areas.

Figure 6. Soil salinity patterns reflect depth to groundwater in Hermann’s catchment, and salinity of soil layers along an idealized toposequence.


This article has described the major chemical processes in salt-affected landscapes and causes of salinity, sodicity, and alkalinity in soils. Weathering of soil parent material under strongly seasonally contrasted climate, microbial activity, mineral equilibria, and ion exchange reactions controls the chemical composition of soil and water. Salinity is naturally present in the environment and presents major challenges to agriculture. Patterns of soil salinity can respond to changes in rainfall in a matter of years. But natural terrestrial ecosystems have evolved that are adapted to the wide range of saline chemistries observed; they are dynamic systems. Future challenges will be to understand how organisms have adapted to extreme saline, sodic, and alkaline conditions that exert multiple stresses on them concurrently—this may be the key to breeding salt-tolerant crops for farming on saline land—and to preserve some of the ecosystems in which they thrive.


  • Adam, P. (1990). Saltmarsh ecology. Cambridge, U.K.: Cambridge University Press.
  • Al-Droubi, A., Fritz, B., Gac, J. Y., & Tardy, Y. (1980). Generalized residual alkalinity concept; application to prediction of the chemical evolution of natural waters by evaporation. American Journal of Science, 280, 560–572.
  • Anand, R. R., & Paine, M. (2002). Regolith geology of the Yilgarn Craton, Western Australia: Implications for exploration. Australian Journal of Earth Sciences, 49(1), 3–162.
  • Appleyard, S., Wong, S., Willis-Jones, B., Angeloni, J., & Watkins, R. (2004). Groundwater acidification caused by urban development in Perth, Western Australia: Source, distribution, and implications for management. Soil Research, 42(6), 579–585.
  • Aryal, R., Kandel, D., Acharya, D., Chong, M. N., & Beecham, S. (2012). Unusual Sydney dust storm and its mineralogical and organic characteristics. Environmental Chemistry, 9(6), 537–546.
  • Benison, K. C., & Bowen, B. B. (2013). Extreme sulfur-cycling in acid brine lake environments of Western Australia. Chemical Geology, 351, 154–167.
  • Benison, K. C., & Lowenstein, T. K. (2015). Expansion of the Hardie-Eugster brine evolution model into the low pH realm. Paper 199-3, GSA Annual Meeting, Baltimore, Maryland, November 1–4, 2015.
  • Berner, R. A. (2012). Jacques-Joseph Ébelmen, the founder of earth system science. Comptes Rendus Geoscience, 344(11), 544–548.
  • Brautigan, D., Rengasamy, P., & Chittleborough, D. (2012). Aluminium speciation and phytotoxicity in alkaline soils. Plant and Soil, 360, 187–196.
  • Bricker, O. P., Pačes, T., Johnson, C., Sverdrup, H., Moldan, B., & Cerny, J. (1994). Weathering and erosion aspects of small catchment research. In B. Moldan & J. Cerny (Eds.), Biogeochemistry of small catchments: A tool for environmental research (pp. 85–105). New York: Wiley.
  • Brinkman, R. (1970). Ferrolysis, a hydromorphic soil forming process. Geoderma, 3, 199–206.
  • Capo, R. C., & Chadwick, O. A. (1999). Sources of strontium and calcium in desert soil and calcrete. Earth and Planetary Science Letters, 170(1), 61–72.
  • Chiquet, A., Michard, A., Nahon, D., & Hamelin, B. (1999). Atmospheric input vs in situ weathering in the genesis of calcretes: An Sr isotope study at Gálvez (Central Spain). Geochimica et Cosmochimica Acta, 63(3), 311–323.
  • Cisneros, J. M., Cantero, J. J., & Cantero, A. (1999). Vegetation, soil hydrophysical properties, and grazing relationships in saline-sodic soils of Central Argentina. Canadian Journal of Soil Science, 79, 399–409.
  • Dart, R. C., Barovich, K. M., Chittleborough, D. J., & Hill, S. M. (2007). Calcium in regolith carbonates of central and southern Australia: Its source and implications for the global carbon cycle. Palaeogeography, Palaeoclimatology, Palaeoecology, 249, 322–334.
  • Deocampo, D. M., & Renaut, R. W. (2016). Geochemistry of African soda lakes. In Soda lakes of East Africa (pp. 77–93). Cham, Switzerland: Springer.
  • Duchaufour, P. (1982). Pedology: Pedogenesis and classification. London: Allen and Unwin.
  • Eugster, H. P., & Hardie, L. A. (1978). Saline lakes. In Lakes (pp. 237–293). New York: Springer.
  • Fitzpatrick, R. W., Bruce, D. A., Davies, P. J., Spouncer, L. R., Merry, R. H., … Maschmedt, D. (1999). Soil landscape quality assessment at catchment and regional scale. Mt Lofty Ranges Pilot Implementation Project, National Land and Water Resources Audit. CSIRO Land and Water Technical Report 28/99. Adelaide, Australia: CSIRO.
  • Fitzpatrick, R. W., Fritsch, E., & Self, P. G. (1996). Interpretation of soil features produced by ancient and modern processes in degraded landscapes: V. Development of saline sulfidic features in non-tidal seepage areas. Geoderma, 69(1), 1–29.
  • Frenkel, H., Levy, G. J., & Fey, M. V. (1992). Clay dispersion and hydraulic conductivity of clay-sand mixtures as affected by the addition of various anions. Clays and Clay Minerals, 40, 515–521.
  • Friedrich, C. G., Rother, D., Bardischewsky, F., Quentmeier, A., & Fischer, J. (2001). Oxidation of reduced inorganic sulfur compounds by bacteria: Emergence of a common mechanism? Applied Environmental Microbiology, 67(7), 2873–2882.
  • Fritsch, E., & Fitzpatrick, R. W. (1994). Interpretation of soil features produced by ancient and modern processes in degraded landscapes. 1. A new method for constructing conceptual soil-water-landscape models. Soil Research, 32, 889–907.
  • George, R. J., Nulsen, R. A., Ferdowsian, R., & Raper, G. P. (1999). Interactions between trees and groundwaters in recharge and discharge areas—A survey of West Australian sites. Agricultural Water Management, 39, 91–113.
  • Ghassemi, F., Jakeman, A. J., & Nix, H. A. (1995). Salinisation of land and water resources: Human causes, extent, management and case studies. Sydney: UNSW Press.
  • Gile, L. H., Monger, H. C., Grossman, R. B., Ahrens, R. J., Hawley, J. W., Peterson, F. F., … Nolen, B. A. (2007). A 50th anniversary guidebook for the Desert Project. Lincoln, NE: U.S. Department of Agriculture.
  • Hall, K. C., Baldwin, D. S., Rees, G. N., & Richardson, A. J. (2006). Distribution of inland wetlands with sulfidic sediments in the Murray-Darling Basin, Australia. Science of the Total Environment, 370, 235–244.
  • Hardie, L. A., & Eugster, H. P. (1970). The evolution of closed-basin brines. Mineralogical Society of America Special Publication, 3, 273–290.
  • Hill, S. M., McQueen, K. G., & Foster, K. A. (1999). Regolith carbonate accumulations in western and central NSW: Characteristics and potential use as an exploration sampling medium. In G. Taylor & C. Pain (Eds.), New approaches to an old continent, Regolith ’98 proceedings (pp. 191–208). Perth, Australia: Cooperative Research Centre for Landscape Evolution and Mineral Exploration.
  • Isbell, R. F. (1996). The Australian Soil Classification (CSIRO Publishing: Collingwood, Vic.).
  • International Union of Soil Sciences. (2015). World reference base for soil resources 2014. A framework for international classification, correlation and communication. Rome: Food and Agriculture Organization.
  • Keren, R. (1991). Specific effect of magnesium on soil erosion and water infiltration. Soil Science Society of America Journal, 55(3), 783–787.
  • Keywood, M. D., Chivas, A. R., Fifield, L. K., Cresswell, R. G., & Ayers, G. P. (1997). The accession of chloride to the western half of the Australian continent. Australian Journal of Soil Research, 35, 1177–1189.
  • Long, D. T., Lyons, W. B., & Hines, M. E. (2009). Influence of hydrogeology, microbiology and landscape history on the geochemistry of acid hypersaline waters, NW Victoria. Applied Geochemistry, 24, 285–296.
  • Lo Nostro, P., & Ninham, B. W. (2012). Hofmeister phenomena: an update on ion specificity in biology. Chemical Reviews, 112(4), 2286–2322.
  • Liu, X., Li, H., Du, W., Tian, R., Li, R., & Jiang, X. (2013). Hofmeister effects on cation exchange equilibrium: quantification of ion exchange selectivity. The Journal of Physical Chemistry C, 117(12), 6245–6251.
  • Mau, Y., & Porporato, A. (2016). Optimal control solutions to sodic soil reclamation. Advances in Water Resources, 91, 37–45.
  • McNeal, B. L., Layfield, D. A., Norvell, W. A., & Rhoades, J. D. (1968). Factors influencing hydraulic conductivity of soils in the presence of mixed-salt solutions. Soil Science Society of America Journal, 32(2), 187–190.
  • McIvor, J. G., & Monypenny, R. (1995). Evaluation of pasture management systems for beef production in the semi-arid tropics: Model development. Agricultural Systems, 49(1), 45–67.
  • Mernagh, T. P., Bastrakov, E. N., Jaireth, S., de Caritat, P., English, P. M., & Clarke, J. D. A. (2016). A review of Australian salt lakes and associated mineral systems. Australian Journal of Earth Sciences, 1–27.
  • Miletto, M., Loy, A., Antheunisse, A. M., Loeb, R., Bodelier, P. L., & Laanbroek, H. J. (2008). Biogeography of sulfate-reducing prokaryotes in river floodplains. FEMS Microbiology Ecology, 64(3), 395–406.
  • Miyamoto, S., & Stroehlein, J. L. (1986). Sulfuric acid effects on water infiltration and chemical properties of alkaline soils and water. Transactions of the ASAE, 29(5), 1288–1296.
  • Mormile, M. R., Hong, B. Y., & Benison, K. C. (2009). Molecular analysis of the microbial communities of Mars analog lakes in Western Australia. Astrobiology, 9(10), 919–930.
  • Mulrennan, M. E., & Woodroffe, C. D. (1998). Saltwater intrusion into the coastal plains of the Lower Mary River, Northern Territory, Australia. Journal of Environmental Management, 54(3), 169–188.
  • Naidu, R., & Rengasamy, P. (1993). Ion interactions and constraints to plant nutrition in Australian sodic soils. Soil Research, 31, 801–819.
  • Naiman, Z., Quade, J., & Patchett, P. J. (2000). Isotopic evidence for eolian recycling of pedogenic carbonate and variations in carbonate dust sources throughout the southwest United States. Geochimica et Cosmochimica Acta, 64(18), 3099–3109.
  • Nasri, N., Bouhlila, R., Saaltink, M. W., & Gamazo, P. (2015). Modeling the hydrogeochemical evolution of brine in saline systems: Case study of the Sabkha of Oum El Khialate in South East Tunisia. Applied Geochemistry, 55, 160–169.
  • Oren, A. (2002). Diversity of halophilic microorganisms: Environments, phylogeny, physiology, and applications. Journal of Industrial Microbiology and Biotechnology, 28, 56–63.
  • Qadir, M., Steffens, D., Yan, F., & Schubert, S. (2003). Sodium removal from a calcareous saline-sodic soil through leaching and plant uptake during phytoremediation. Land Degradation & Development, 14(3), 301–307.
  • Quade, J., Chivas, A. R., & McCulloch, M. T. (1995). Strontium and carbon isotope tracers and the origins of soil carbonate in South Australia and Victoria. Palaeogeography, Palaeoclimatology, Palaeoecology, 113, 103–117.
  • Quirk, J. P., & Schofield, R. K. (1955). The effect of electrolyte concentration on soil permeability. European Journal of Soil Science, 6, 163–178.
  • Rengasamy, P. (2006). World salinization with emphasis on Australia. Journal of Experimental Botany, 57, 1017–1023.
  • Rengasamy, P., Chittleborough, D., & Helyar, K. (2003). Root-zone constraints and plant-based solutions for dryland salinity. Plant and Soil, 257, 249–260.
  • Richards, L. A. (Ed.). (1954). Diagnosis and improvement of saline and alkali soils. Washington, DC: USDA.
  • Runyan, C. W., & D’Odorico, P. (2010). Ecohydrological feedbacks between salt accumulation and vegetation dynamics: Role of vegetation‐groundwater interactions. Water Resources Research, 46(11), W11561.
  • Schagerl, M. (Ed.). (2016). Soda lakes of East Africa. Switzerland: Springer.
  • Schofield, R., Thomas, D. S. G., & Kirkby, M. J. (2001). Causal processes of soil salinization in Tunisia, Spain and Hungary. Land Degradation & Development, 12(2), 163–181.
  • Šimůnek, J., & Suarez, D. L. (1994). Two-dimensional transport model for variably saturated porous media with major ion chemistry. Water Resources Research, 30(4), 1115–1133.
  • Sparks, D. L. (1995). Environmental soil chemistry. San Diego, CA: Academic Press.
  • Stumm, W., & Morgan, J. J. (1970). Aquatic chemistry. New York: Wiley Interscience.
  • Szabolcs, I. (1974). Salt-affected soils in Europe. The Hague: M. Nijhoff.
  • van Beek, C. G. E. M., & van Breemen, N. (1973). The alkalinity of alkali soils. European Journal of Soil Science, 24, 129–136.
  • Wang, H., Hsieh, Y. P., Harwell, M. A., & Huang, W. (2007). Modeling soil salinity distribution along topographic gradients in tidal salt marshes in Atlantic and Gulf coastal regions. Ecological Modelling, 201(3), 429–439.
  • Webb, J. S., McGinnes, S., & Lappin-Scott, H. M. (1998). Metal removal by sulphate-reducing bacteria from natural and constructed wetlands. Journal of Applied Microbiology, 84, 240–248.
  • Whittig, L. D., & Janitsky, P. (1963). Mechanisms of formation of sodium carbonate in soils. 1. Manifestations of biological conversions. Journal of Soil Science, 14(2), 322–333.
  • Wilford, J., de Caritat, P., & Bui, E. (2015). Modelling the abundance of soil calcium carbonate across Australia using geochemical survey data and environmental predictors. Geoderma, 259, 81–92.
  • Williamson, D. R. (1986). The hydrology of salt affected soils in Australia. Reclamation and Revegetation Research, 5, 181–196.
  • Wolicka, D., & Jarzynowska, L. (2012). Microbiological reduction of sulphates in salty environments and mineralogical characterization of the transformation products. Geomicrobiology Journal, 29(6), 528–536.
  • Yan, K., Xu, H., Zhao, S., Shan, J., & Chen, X. (2016). Saline soil desalination by honeysuckle (Lonicera japonica Thunb.) depends on salt resistance mechanism. Ecological Engineering, 88, 226–231.
  • Yang, C., Guo, W., & Shi, D. (2010). Physiological roles of organic acids in alkali-tolerance of the alkali-tolerant halophyte. Agronomy Journal, 102(4), 1081–1089.
  • Zhang, X. C., & Norton, L. D. (2002). Effect of exchangeable Mg on saturated hydraulic conductivity, disaggregation and clay dispersion of disturbed soils. Journal of Hydrology, 260, 194–205.