1-16 of 16 Results  for:

  • Planetary Chemistry and Cosmochemistry x
  • Planetary Surfaces x
Clear all

Article

Astrobiology (Overview)  

Sean McMahon

Astrobiology seeks to understand the origin, evolution, distribution, and future of life in the universe and thus to integrate biology with planetary science, astronomy, cosmology, and the other physical sciences. The discipline emerged in the late 20th century, partly in response to the development of space exploration programs in the United States, Russia, and elsewhere. Many astrobiologists are now involved in the search for life on Mars, Europa, Enceladus, and beyond. However, research in astrobiology does not presume the existence of extraterrestrial life, for which there is no compelling evidence; indeed, it includes the study of life on Earth in its astronomical and cosmic context. Moreover, the absence of observed life from all other planetary bodies requires a scientific explanation, and suggests several hypotheses amenable to further observational, theoretical, and experimental investigation under the aegis of astrobiology. Despite the apparent uniqueness of Earth’s biosphere— the “n = 1 problem”—astrobiology is increasingly driven by large quantities of data. Such data have been provided by the robotic exploration of the Solar System, the first observations of extrasolar planets, laboratory experiments into prebiotic chemistry, spectroscopic measurements of organic molecules in extraterrestrial environments, analytical advances in the biogeochemistry and paleobiology of very ancient rocks, surveys of Earth’s microbial diversity and ecology, and experiments to delimit the capacity of organisms to survive and thrive in extreme conditions.

Article

Chemical Weathering on Venus  

Mikhail Zolotov

Chemical and phase compositions of the surface of Venus could reflect a history of gas–rock and fluid–rock interactions, recent and past climate changes, and a loss of water from the Earth’s sister planet. The concept of chemical weathering on Venus through gas–solid type reactions was established in the early 1960s after the discovery of the hot and dense CO2-rich atmosphere of the planet, inferred from Earth-based and Mariner 2 radio emission data. Initial models suggested carbonation, hydration, and oxidation of exposed igneous rocks and a control (buffering) of atmospheric gases by solid–gas type chemical equilibria in the near-surface rocks. Carbonates, phyllosilicates and Fe oxides were considered likely secondary minerals. From the late 1970s onward, measurements of trace gases in the sub-cloud atmosphere by the Pioneer Venus and Venera entry probes and by Earth-based infrared spectroscopy challenged the likelihood of hydration and carbonation. The atmospheric H2O gas content appeared to be low enough to allow the stable existence of H2O-bearing and a majority of OH-bearing minerals. The concentration of SO2 gas was too high to allow the stability of Ca-rich carbonates and silicates with respect to sulfatization to CaSO4. In the 1980s, the detection of an elevated bulk S content at the Venera and Vega landing sites suggested ongoing consumption of atmospheric SO2 to surface sulfates. The supposed composition of the near-surface atmosphere implied oxidation of ferrous minerals to Fe oxides, magnetite and hematite, consistent with the infrared reflectance of surface materials. The likelihood of sulfatization and oxidation has been illustrated in modeling experiments in simulated Venus’ conditions. The morphology of Venus’ surface suggests contact of atmospheric gases with hot surface materials of mainly basaltic composition during the several hundreds of millions years since a global volcanic/tectonic resurfacing. Some exposed materials could have reacted at higher and lower temperatures in a presence of diverse gases at different altitudinal, volcanic, impact, and atmospheric settings. On highly deformed tessera terrains, more ancient rocks of unknown composition may reflect interactions with putative water-rich atmospheres and even aqueous solutions. Geological formations rich in salt, carbonate, Fe oxide, or silica will indicate past aqueous processes. The apparent diversity of affected solids, surface temperatures, pressures, and gas/fluid compositions throughout Venus’ history implies multiple signs of chemical alterations that remain to be investigated. The current understanding of chemical weathering is limited by the uncertain composition of the deep atmosphere, by the lack of direct data on the phase and chemical composition of surface materials, and by the uncertain data on thermodynamics of minerals and their solid solutions. In preparation for further atmospheric entry probe and lander missions, rock alteration could be investigated through chemical kinetic experiments and calculations of solid-gas/fluid equilibria to constrain past and present processes.

Article

Clouds in the Martian Atmosphere  

A. Määttänen and F. Montmessin

Although resembling an extremely dry desert, planet Mars hosts clouds in its atmosphere. Every day somewhere on the planet a part of the tiny amount of water vapor held by the atmosphere can condense as ice crystals to form mainly cirrus-type clouds. The existence of water ice clouds has been known for a long time and they have been studied for decades, leading to the establishment of a well-known climatology and understanding on their formation and properties. Despite their thinness, they have a clear impact on the atmospheric temperatures, thus affecting the Martian climate. Another, more exotic type of clouds forms as well on Mars. The atmospheric temperatures can plunge to such frigid values that the major gaseous component of the atmosphere, CO2, condenses as ice crystals. These clouds form in the cold polar night where they also contribute to the formation of the CO2 ice polar cap, and also in the mesosphere at very high altitudes, near the edge of space, analogously to the noctilucent clouds on Earth. The mesospheric clouds, discovered in the early 2000s, have put our understanding of the Martian atmosphere to a test. On Mars, cloud crystals form on ice nuclei, mostly provided by the omnipresent mineral dust. Thus, the clouds link the three major climatic cycles: those of the two major volatiles, H2O and CO2, and that of dust, which is a major climatic agent itself.

Article

Composition of Earth  

H. Palme

Early models of the composition of the Earth relied heavily on meteorites. In all these models Earth had different layers, each layer corresponded to a different type of meteorite or meteorite component. Later, more realistic models based on analyses of samples from Earth began with Ringwood’s pyrolite composition in the 1960s. Further improvement came with the analyses of rare MgO rich peridotites from a variety of occurrences all over the Earth, as xenoliths enclosed in melts from the upper mantle or as ultramafic massifs, tectonically emplaced on the Earth’s surface. Chemical systematics of these rocks allow the determination of the major element composition of the primitive upper mantle (PUM), the upper mantle after core formation and before extraction of basalts ultimately leading to the formation of the crust. Trace element analyses of upper mantle rocks confirmed their primitive nature. Geochemical and geophysical evidence argue for a bulk Earth mantle of uniform composition, identical to the PUM, also designated as “bulk silicate Earth” (BSE). The formation of a metal core was accompanied by the removal of siderophile and chalcophile elements into the core. Detailed modeling suggests that core formation was an ongoing process parallel to the accretion of Earth. The composition of the core is model dependent and thus uncertain and makes reliable estimates for siderophile and chalcophile element concentrations of bulk Earth difficult. Improved stable isotope analyses show isotopic similarities with noncarbonaceous chondrites (NCC), while the chemical composition of the mantle of the Earth indicates similarities with carbonaceous chondrites (CC). In detail, however, it can be shown that no single known meteorite group, nor any mixture of meteorite groups can match the chemical and isotopic composition of Earth. This conclusion is extremely important for any formation model of the Earth.

Article

Cosmogenic Nuclides  

Rainer Wieler

Cosmogenic nuclides are produced by the interaction of energetic elementary particles of galactic cosmic radiation (GCR) and their secondaries with atomic nuclei in extraterrestrial or terrestrial material. In extraterrestrial samples cosmogenic nuclides produced by energetic particles emitted by the Sun (SCR) are also detectable. Cosmogenic nuclides usually are observable only for noble gas isotopes, whose natural abundances in the targets of interest are exceedingly low, with some radioactive isotopes having half-lives mostly in the million-year range, and a few stable nuclides of elements such as Gd and Sm whose abundance is appreciably modified by reactions with low-energy secondary cosmic-ray neutrons. In solid matter, the mean attenuation length of GCR protons is on the order of 50 cm. Therefore, cosmogenic nuclides are a major tool to study the history of small objects in space and of matter near the surfaces of larger parent bodies. A classical application is to measure “exposure ages” of meteorites, that is, the time they spent as a small body in interplanetary space. In some cases, the previous history of the future meteorite in its parent-body regolith can also be constrained. Such information helps to understand delivery mechanisms of meteorites from their parent asteroids (mainly from the main belt) or parent planets, and to constrain the number of ejection events responsible for the meteorites in collections worldwide. Cosmogenic nuclides in lunar samples from known depths of up to ~2 m serve to study the deposition and mixing history of the lunar regolith over hundreds of million years, as well as to calibrate nuclide production models. Present and future sample return missions rely on cosmogenic nuclide measurements as important tools to constrain the sample’s exposure history or loss rates of its parent-body surfaces to space. First measurements of cosmogenic noble gas isotopes on the surface of Mars demonstrate that the exposure and erosional history of planetary bodies can be obtained by in situ analyses. Exposure ages of presolar grains in meteorites provide at present the only quantitative constraint of their presolar history. In some cases, irradiation effects of energetic particles from the early Sun can be detected in early solar system condensates, confirming that the early Sun was likely much more active than later in its history, as expected from observations of young stars. The increasing precision of modern isotope analyses also reveals tiny isotopic anomalies induced by cosmic-ray effects in several elements of interest in cosmochemistry, which need to be recognized and corrected for. Cosmogenic nuclide studies rely on the knowledge of their production rates, which depend on the elemental composition of a sample and its “shielding” during irradiation, that is, its position within an irradiated object, and for meteorites their pre-atmospheric size. The physics of cosmogenic nuclide production is basically well understood and has led to sophisticated production models. They are most successful if a sample’s shielding can be constrained by the analyses of several cosmogenic nuclides with different depth dependencies of their production rates. Cosmogenic nuclides are also an important tool in Earth sciences, although this is not a topic of this article. The foremost example is 14C produced in the atmosphere and incorporated into organic material, which is used for dating. Cosmogenic radionucuclides and noble gases produced in situ in near-surface samples, mostly by secondary cosmic-ray neutrons, are an important tool in quantitative geomorphology and related fields.

Article

Element Partitioning (Mineral-Melt, Metal-/Sulfide-Silicate) in Planetary Sciences  

Brandon Mahan

Element partitioning—at its most basic—is the distribution of an element of interest between two constituent phases as a function of some process. Major constituent elements generally affect the thermodynamic environment (chemical equilibrium) and therefore trace element partitioning is often considered, as trace elements are present in minute quantities and their equilibrium exchange reactions do not impart significant changes to the larger system. Trace elements are responsive to thermodynamic conditions, and thus they act as passive tracers of chemical reactions without appreciably influencing the bulk reactions themselves. In planetary sciences, the phase pairs typically considered are mineral-melt, metal-silicate, and sulfide-silicate, owing largely to the ubiquity of their coexistence in planetary materials across scales and context, from the micrometer-sized components of meteorites up to the size of planets (thousands of kilometers). It is common to speak of trace elements in terms of their tendency toward forming metallic, sulfidic, or oxide phases, and the terms “siderophile,” “chalcophile,” and “lithophile” (respectively) are used to define these tendencies under what is known as the Goldschmidt Classification scheme. The metric of an element’s tendency to concentrate into one phase relative to another is expressed as the ratio of its concentration (as a weight or molar fraction) in one phase over another, where convention dictates the reference frame as solid over liquid, and metal or sulfide over silicate; this mathematical term is the element’s partition coefficient, or distribution coefficient, between the two respective phases, D M Phase B Phase A (where M is the element of interest, most often reported as molar fraction), or simply D M . In general, trace elements obey Henry’s Law, where the element’s activity and concentration are linearly proportional. Practically speaking, this means that the element is sufficiently dilute in the system such that its atoms interact negligibly with one another compared to their interactions with major element phases, and thus the trace element’s partition coefficient in most settings is not appreciably affected by its concentration. The radius and charge of an element’s ionized species (its ionic radius and valence state)—in relation to either the major element ion for which it is substituting or the lattice site vacancy or interstitial space it is filling—generally determine the likelihood of trace element substitution or vacancy/interstitial fill (along with the net charge of the lattice space). The key energy consideration that underlies an element’s partitioning is the Gibbs free energy of reaction between the phases involved. Gibbs free energy is the change in internal energy associated with a chemical reaction (at a given temperature and pressure) that can be used to do work, and is denoted as Δ G rxn . Reactions with negative Δ G rxn values are spontaneous, and the magnitude of this negative value for a given phase, for example, a metal oxide, denotes the relative affinity of the metal toward forming oxides. That is to say, an element with a highly negative Δ G rxn for its oxide species at relevant pressure-temperature conditions will tend to be found in oxide and silicate minerals, that is, it will be lithophile (and vice versa for siderophile elements). Trace element partitioning systematics in mineral-melt and metal-/sulfide-silicate systems have boundless applications in planetary science. A growing collective understanding of the partition coefficients of elements has been built on decades of physical chemistry, deterministic theory, petrology, experimental petrology, and natural observations. Leveraging this immense intellectual, technical, and methodological foundation, modern trace element partitioning research is particularly aimed at constraining the evolution of plate tectonics on Earth (conditions and timing of onset), understanding the formation history of planetary materials such as chondrite meteorites and their constituents (e.g., chondrules), and de-convolving the multiply operating processes at play during the accretion and differentiation of Earth and other terrestrial planets.

Article

Extraterrestrial Resources  

V.V. Shevchenko

Since the early 1990s, in analytical reviews, experts have increasingly been paying attention to the growing scarcity of rare and rare earth metals (REM) necessary for the development of advanced technologies in modern industry. The volume of the world market has increased over the past 50 years from 5,000 to 125,000 tons per year, which is explained by the extensive use of REM in the rapidly developing areas of industry associated with the advancement of high technology. Unique properties of REM are primarily used in the aerospace and other industrial sectors of the economy, and therefore are strategic materials. For example, platinum is an indispensable element that is used as a catalyst for chemical reactions. No battery can do without platinum. If all the millions of vehicles traveling along our roads installed hybrid batteries, all platinum reserves on Earth would end in the next 15 years! Consumers are interested in six elements known as the platinum group of metals (PGM): iridium (Ir), osmium (Os), palladium (palladium, Pd), rhodium (rhodium, Rh), ruthenium (ruthenium, Ru), and platinum itself. These elements, rare on the Earth, possess unique chemical and physical properties, which makes them vital industrial materials. To solve this problem, projects were proposed for the utilization of the substance of asteroids approaching the Earth. According to modern estimates, the number of known asteroids approaching the Earth reaches more than 9,000. Despite the difficulties of seizing, transporting, and further developing such an object in space, this way of solving the problem seemed technologically feasible and cost-effectively justified. A 10 m iron-nickel asteroid could contain up to 75 tons of rare metals and REM, primarily PGM, equivalent to a commercial price of about $2.8 billion in 2016 prices. However, the utilization of an asteroid substance entering the lunar surface can be technologically simpler and economically more cost-effective. Until now, it was believed that the lunar impact craters do not contain the rocks of the asteroids that formed them, since at high velocities the impactors evaporate during a collision with the lunar surface. According to the latest research, it turned out that at a fall rate of less than 12 km/s falling body (drummer) can partially survive in a mechanically fractured state. Consequently, the number of possible resources present on the lunar surface can be attributed to nickel, cobalt, platinum, and rare metals of asteroid origin. The calculations show that the total mass, for example, of platinum and platinoids on the lunar surface as a result of the fall of asteroids may amount more than 14 million tons. It should be noted that the world’s known reserves of platinum group metals on the Earth are about 80,000 tons.

Article

Isotopic Dating  

Yuri Amelin

Isotopic dating is the measurement of time using the decay of radioactive isotopes and accumulation of decay products at a known rate. With isotopic chronometers, we determine the time of the processes that fractionate parent and daughter elements. Modern isotopic dating can resolve time intervals of ~1 million years over the entire lifespan of the Earth and the Solar System, and has even higher time resolution for the earliest and the most recent geological history. Using isotopic dates, we can build a unified scale of time for the evolution of Earth, the Moon, Mars, and asteroids, and expand it as samples from other planets become available for study. Modern geochronology and cosmochronology rely on isotopic dating methods that are based on decay of very long-lived radionuclides: 238U, 235U, 40K, 87Rb, 147Sm, etc. to stable radiogenic nuclides 206Pb, 207Pb, 40K, 40Ca, 87Sr, 143Nd, and moderately long-lived radionuclides: 26Al, 53Mn, 146Sm, 182Hf, to stable nuclides 26Mg, 53Cr, 142Nd, 182W. The diversity of physical and chemical properties of parent (radioactive) and daughter (radiogenic) nuclides, their geochemical and cosmochemical affinities, and the resulting diversity of processes that fractionate parent and daughter elements, allows direct isotopic dating of a vast range of earth and planetary processes. These processes include, but are not limited to evaporation and condensation, precipitation and dissolution, magmatism, metamorphism, metasomatism, sedimentation and diagenesis, ore formation, formation of planetary cores, crystallisation of magma oceans, and the timing of major impact events. Processes that cannot be dated directly, such as planetary accretion, can be bracketed between two datable events.

Article

Lunar Exploration Missions and Environmental Discovery: Status and Progress  

Kyeong J. Kim

Exploration of the Moon is currently one of the most important and interesting subjects. The Moon is considered not only a place to explore but also a place to live in preparation to explore planets beyond it. This opportunity has arisen due to a series of discoveries associated with water on the Moon during the past half century. Lunar exploration of the moon began with the flyby mission by the United States in 1959. Since then, scientific investigations of the Moon have increased understanding of the lunar geology and surface environment. Based on more than 70 lunar missions to date, a major goal is to explore how humans can live on the Moon for a long period of time to examine sustainability on the Moon. Consequently, the area of lunar science and technology is being employed to discover how in situ resources can be utilized for humans to live on the Moon and, eventually, Mars and beyond.

Article

Martian Paleoclimate  

Robert M. Haberle

The climate of Mars has evolved over time. Early in its history, between 3.7 and 4.1 billion years ago, the climate was warmer and wetter and the atmosphere thicker than it is today. Erosion rates were higher than today, and liquid water flowed on the planet’s surface, carving valley networks, filling lakes, creating deltas, and weathering rocks. This implies runoff and suggests rainfall and/or snowmelt. Oceans may have existed. Over time, the atmosphere thinned, erosion rates declined, water activity ceased, and cooler and drier conditions prevailed. Ice became the dominate form of surface water. Yet the climate continued to evolve, driven now by large variations in Mars’ orbit parameters. Beating in rhythm with these variations, surface ice has been repeatedly mobilized and moved around the planet, glaciers have advanced and retreated, dust storms and polar caps have come and gone, and the atmosphere has collapsed and re-inflated many times. The layered terrains that now characterize both polar regions are telltale signatures of this cyclical behavior and owe their existence to modulations of the seasonal cycles of dust, water, and CO2. Contrary to the early images from the Mariner flybys of the 1960s, Mars is and has been a dynamically active planet whose surface has been partly shaped through its interaction with a changing atmosphere and climate system.

Article

Mass Erosion and Transport on Cometary Nuclei, as Found on 67P/Churyumov-Gerasimenko  

Wing-Huen Ip

The Rosetta spacecraft rendezvoused with comet 67P/Churyumov-Gerasimenko in 2014–2016 and observed its surface morphology and mass loss process. The large obliquity (52°) of the comet nucleus introduces many novel physical effects not known before. These include the ballistic transport of dust grains from the southern hemisphere to the northern hemisphere during the perihelion passage, thus shaping the dichotomy of two sides, with the northern hemisphere largely covered by dust layers from the recycled dusty materials (back fall) and the southern hemisphere consisting mostly of consolidated terrains. A significant amount of surface material up to 4–10 m in depth could be transferred across the nucleus surface in each orbit. New theories of the physical mechanisms driving the outgassing and dust ejection effects are being developed. There is a possible connection between the cometary dust grains and the fluffy aggregates and pebbles in the solar nebula in the framework of the streaming-instability scenario. The Rosetta mission thus succeeded in fulfilling one of its original scientific goals concerning the origin of comets and their relation to the formation of the solar system.

Article

Petrology and Geochemistry of Mercury  

Shoshana Z. Weider

Having knowledge of a terrestrial planet’s chemistry is fundamental to understanding the origin and composition of its rocks. Until recently, however, the geochemistry of Mercury—the Solar System’s innermost planet—was largely unconstrained. Without the availability of geological specimens from Mercury, studying the planet’s surface and bulk composition relies on remote sensing techniques. Moreover, Mercury’s proximity to the Sun makes it difficult to study with Earth/space-based telescopes, or with planetary probes. Indeed, to date, only NASA’s Mariner 10 and MESSENGER missions have visited Mercury. The former made three “flyby” encounters of Mercury between 1974 and 1975, but did not carry any instrument to make geochemical or mineralogical measurements of the surface. Until the MESSENGER flyby and orbital campaigns (2008–2015), therefore, knowledge of Mercury’s chemical composition was severely limited and consisted of only a few facts. For example, it has long been known that Mercury has the highest uncompressed density (i.e., density with the effect of gravity removed) of all the terrestrial planets, and thus a disproportionately large Fe core. In addition, Earth-based spectral reflectance observations indicated a dark surface, largely devoid of Fe within silicate minerals. To improve understanding of Mercury’s geochemistry, the MESSENGER scientific payload included a suite of geochemical sensing instruments: in particular, an X-Ray spectrometer and a gamma-ray and neutron spectrometer. The datasets obtained from these instruments (as well as from other complementary instruments) during MESSENGER’s 3.5-year orbital mission allow a much more complete picture of Mercury’s geochemistry to be drawn, and quantitative abundance estimates for several major rock-forming elements in Mercury’s crust are now available. Overall, the MESSENGER data reveal a surface that is rich in Mg, but poor in Al and Ca, compared with typical terrestrial and lunar crustal materials. Mercury’s surface also contains high concentrations of the volatile elements Na, S, K, and Cl. Furthermore, the total surface Fe abundance is now known to be <2 wt%, and the planet’s low-reflectance is thought to be primarily caused by the presence of C (in the form of graphite) at a level of >1 wt%. Such data are key to constraining models of Mercury’s formation and early evolution. Large-scale spatial variations in the MESSENGER geochemical datasets have also led to the designation of several geochemical “terranes,” which do not always align with otherwise mapped geological regions. Based on the MESSENGER geochemical results, petrological experiments and calculations have been, and continue to be, performed to study Mercury’s surface mineralogy and petrology. The results show that there are likely to be substantial differences in the precise mineral compositions and abundances amongst the different terranes, but Mercury’s surface appears to be dominated by Mg-rich olivine and pyroxene, as well as plagioclase and sulfide phases. Depending on the classification scheme used, Mercury’s ultramafic surface rocks can thus be described as similar in nature to terrestrial boninites, andesites, norites, or gabbros.

Article

Planetary Spectroscopy  

Alian Wang

Planetary spectroscopy uses physical methods to study the chemical properties of the geological materials on the planetary bodies in our solar system. This article will present twelve types of spectroscopy frequently used in planetary explorations. Their energy (or wavelength) varies from γ-ray (keV) to far-infrared (μm), which involves the transitions of nuclei, atoms, ions, and molecules in planetary materials. The article will cover the basic concept of the transition for each of the twelve types of spectroscopy, along with their legendary science discoveries made during the past planetary exploration missions by the international planetary science and engineering community. The broad application of spectroscopy in planetary exploration is built upon the fact that only limited extraterrestrial materials were collected (meteorites, cosmic dust, and the returned samples by missions) that enabled the detailed investigations of their properties in laboratories, while spectroscopic measurements can be made on the objects of our solar system remotely and robotically, such as during the flyby, orbiting, lander, and rover missions. In this sense, the knowledge obtained by planetary spectroscopy has contributed to a major portion of planetary sciences. In the coming era of space explorations, more powerful spacecraft will be sent out by mankind, go to deep space, and explore exotic places. Generations of new planetary science payloads, including planetary spectrometers, will be created and will fly. New sciences will be revealed.

Article

Science and Exploration of the Moon: Overview  

Bradley L. Jolliff

Earth’s moon, hereafter referred to as “the Moon,” has been an object of intense study since before the time of the Apollo and Luna missions to the lunar surface and associated sample returns. As a differentiated rocky body and as Earth’s companion in the solar system, much study has been given to aspects such as the Moon’s surface characteristics, composition, interior, geologic history, origin, and what it records about the early history of the Earth-Moon system and the evolution of differentiated rocky bodies in the solar system. Much of the Apollo and post-Apollo knowledge came from surface geologic exploration, remote sensing, and extensive studies of the lunar samples. After a hiatus of nearly two decades following the end of Apollo and Luna missions, a new era of lunar exploration began with a series of orbital missions, including missions designed to prepare the way for longer duration human use and further exploration of the Moon. Participation in these missions has become international. The more recent missions have provided global context and have investigated composition, mineralogy, topography, gravity, tectonics, thermal evolution of the interior, thermal and radiation environments at the surface, exosphere composition and phenomena, and characteristics of the poles with their permanently shaded cold-trap environments. New samples were recognized as a class of achondrite meteorites, shown through geochemical and mineralogical similarities to have originated on the Moon. New sample-based studies with ever-improving analytical techniques and approaches have also led to significant discoveries such as the determination of volatile contents, including intrinsic H contents of lunar minerals and glasses. The Moon preserves a record of the impact history of the solar system, and new developments in timing of events, sample based and model based, are leading to a new reckoning of planetary chronology and the events that occurred in the early solar system. The new data provide the grist to test models of formation of the Moon and its early differentiation, and its thermal and volcanic evolution. Thought to have been born of a giant impact into early Earth, new data are providing key constraints on timing and process. The new data are also being used to test hypotheses and work out details such as for the magma ocean concept, the possible existence of an early magnetic field generated by a core dynamo, the effects of intense asteroidal and cometary bombardment during the first 500 million–600 million years, sequestration of volatile compounds at the poles, volcanism through time, including new information about the youngest volcanism on the Moon, and the formation and degradation processes of impact craters, so well preserved on the Moon. The Moon is a natural laboratory and cornerstone for understanding many processes operating in the space environment of the Earth and Moon, now and in the past, and of the geologic processes that have affected the planets through time. The Moon is a destination for further human exploration and activity, including use of valuable resources in space. It behooves humanity to learn as much about Earth’s nearest neighbor in space as possible.

Article

The Atmosphere of Titan  

Athena Coustenis

Titan, Saturn’s largest satellite, is one of the most intriguing moons in our Solar System, in particular because of its dense and extended nitrogen-based and organic-laden atmosphere. Other unique features include a methanological cycle similar to the Earth’s hydrological one, surface features similar to terrestrial ones, and a probable under-surface liquid water ocean. Besides the dinitrogen main component, the gaseous content includes methane and hydrogen, which, through photochemistry and photolysis, produce a host of trace gases such as hydrocarbons and nitriles. This very advanced organic chemistry creates layers of orange-brown haze surrounding the satellite. The chemical compounds diffuse downward in the form of aerosols and condensates and are finally deposited on the surface. There is very little oxygen in the atmosphere, mainly in the form of H2O, CO, and CO2. The atmospheric chemical and thermal structure varies significantly with seasons, much like on Earth, albeit on much longer time scales. Extensive analysis of Titan data from ground, Earth-orbiting observatories, and space missions, like those returned by the 13-year operating Cassini-Huygens spacecraft, reveals a complex system with strong interactions among the atmosphere, the surface, and the interior. The processes operating in the atmosphere are informative of what occurs on Earth and give hints as to the origin and evolution of our outer Solar System.

Article

The Surface Composition of Terrestrial Planets  

Nicolas Mangold, Jessica Flahaut, and Véronique Ansan

Planetary surface compositions are fundamental to an understanding of both the interior activity through differentiation processes and volcanic activity and the external evolution through alteration processes and accumulations of volatiles. While the Moon has been studied since early on using ground-based instruments and returned samples, observing the surface composition of the terrestrial planets did not become practical until after the development of orbital and in situ missions with instruments tracking mineralogical and elemental variations. The poorly evolved, atmosphere-free bodies like the Moon and Mercury enable the study of the formation of the most primitive crusts, through processes such as the crystallization of a magma ocean, and their volcanic evolution. Nevertheless, recent studies have shown more diversity than initially expected, including the presence of ice in high latitude regions. Because of its heavy atmosphere, Venus remains the most difficult planetary body to study and the most poorly known in regards to its composition, triggering some interest for future missions. In contrast, Mars exploration has generated a huge amount of data in the last two decades, revealing a planet with a mineralogical diversity close to that of the Earth. While Mars crust is dominated by basaltic material, recent studies concluded for significant contributions of more felsic and alkali-rich igneous material, especially in the ancient highlands. These ancient terrains also display widespread outcrops of hydrous minerals, especially phyllosilicates, which are key in the understanding of past climate conditions and suggest a volatile-rich early evolution with implications for exobiology. Recent terrains exhibit a cryosphere with ice-rich landforms at, or close to the surface, of mid- and high latitudes, generating a strong interest for recent climatic variability and resources for future manned missions. While Mars is certainly the planetary body the most similar to Earth, the observation of specific processes such as those linked to interactions with solar wind on atmosphere-free bodies, or with a thick acidic atmosphere on Venus, improve our understanding of the differences in evolution of terrestrial bodies. Future exploration is still necessary to increase humankind’s knowledge and further build a global picture of the formation and evolution of planetary surfaces.